Tumbler Maker Full Wrap Waterslide Designs 20oz Skinny Bundle Geometric Colored
Beautiful Black and White Skinny Tumbler Design Bundle #4. These will print only black and your tumbler color will show where there is white. This is an optimal design for COLORED tumblers, or Glitter Tumblers for Epoxy and Crystal. This is like a reverse Peekaboo tumbler! The SHIMMER sublimation skinny tumblers look amazing with this type of design! The elegant damask and tufted fabric look makes this tumbler extra elegant!
- Floral and leaves split tumbler design for colored tumblers
- Geometric Split Tumbler Design for colored tumblers
- Geometric and Leaves Split Tumbler Design for Colored Tumblers.
- Swirls and Lace Geometric Split Tumbler Design for Colored Tumblers.
There are photos of actual tumblers made with these designs and sayings you can purchase in our shop. SAYINGS ARE NOT INCLUDED IN THIS PURCHASE.
This design is strategically created to make it SIMPLE to apply, no worrying about lining up, just apply with the last line vertical line on the cup and the other portion overlapped slightly! I put a lot of thought into my tumbler designs to ensure seamless designs and I warp the designs vs just clipping them so they work on the tapered tumblers with the measurements shown!
NOTE: The white in the design is actually WHITE, NOT TRANSPARENT. This is NOT an overlay. You will not be able to lay over top of another color digitally.
INCLUDES 4 DESIGNS (EACH WITH THE FOLLOWING 5 FILES - 20 FILES TOTAL)
SEAMLESS 20oz & 30oz Tumbler Designs!
- 20oz STRAIGHT (non tapered) PNG
- 9.45" W x 8.073" H, can be resized for your needs.
- 20oz TAPERED design #1
- This was made for tumblers that measure 9.25" around the top, 8.75" on the bottom and 8" tall. 300DPI High Resolution. Can be resized slightly for your needs as long as your tumbler measurements are close to this.
- 20oz TAPERED design #2
- This was made for tumblers that measure 9.25" around the top, 8.5" on the bottom and 8" tall. 300DPI High Resolution. Can be resized slightly for your needs as long as your tumbler measurements are close to this.
- 30oz STRAIGHT (non tapered) PNG- NOTE: There is NOT a tapered design provided for 30oz. 30oz tumbler templates require a larger paper than the normal 8.5"wide and your printer must support larger papers.
- 10.05" W x 9.45" H, can be resized for your needs.
- Mockup of the tumblers on the 3D mockup
★★★ Do NOT purchase if your tapered tumbler size varies a lot from the size shown here, or the design may not fit. Straight tumblers can be easily resized.
★★★ If you use EPOXY and or CRYSTALAC and are using this as a waterslide or tattoo, you will have RESIZE each time as the thickness of the tumbler will differ. Only purchase if your tapered base tumbler is similar size to one of tumbler sizes used to make these templates. Straight will work but both will need to be sized up.
These are NOT CUTTING FILES. Sizes can be sized up slightly or made smaller for your project.
You must use external software to print these designs, possibilities are Adobe Photoshop, Affinity Designer, Adobe Photoshop Elements, Corel or Free Silhouette Design Studio.
You must know that your software can handle these types of files. Cricut users, these files are too big to use as a print and cut, you will not be able to print in Cricut.